|
 Lacque for parquet, biocomponent, the highest quality. Very resistant, based poliurietanic. High resistance to abrasion (wear), high resistance to chemicals, especially for traffic
Lacque : - 883 AQUA VARNISHSpecific consumption - 60g/sqm/layer |
|
|
 Water-based grund. Can be applied with palette knife or roll steel. Use before applying lacque Forbo for floor, water-based. Prevents sticking sheets.
Grund lacque: - 882 AQUA PRIMING PAINTconsumption-: 60g/sqm |
|
 Dual component poliurethane based adhesiv. It is made especially for parquet, laminated, etc., eaven for water sensitive materials. Pot-life: 30 min
Adhesiv : - 144 2-C UNIVERSAL ADHEZIV Consumption: - 1-1.2kg/sqm |
|
|
 Grund-based epoxy resin is rapidly consolidates. To carry out the vapor barrier to dig based on cement and concrete with a residual moisture of up to 4CM% mineral media to strengthen . For soldering directly with parquet adhesive based on epoxy resins without sand. Low emissions, no solvents under TGRS 610.
PU baselayer - 042 EURO BLOCK TURBOSpecific consumption: - 0.25kg/sqm |
|
 Leveling compound with low tension and very high final hardness, dig for minerals equalizing up to 20 mm. May apply with pump or jagged knife and extension up to 30% quartz sand, grain 0,4-1,0 mm. Recommended for parquet. Use only indoor. Reduced emissions without chromate according TGRS 613
Leveling compound: - 975 TE /SSpecific consumption: - 1.5kg/sqm/mm |
|
|
|
|
<< Start < Prev 1 2 Next > End >>
|
|
Page 1 of 2 |
Jocuri
.
